Getting StartedΒΆ

The guides below describe the required setup for using the ZCU104 with the Mango 802.11 MAC/PHY Design.

  1. Follow the Hardware Setup guide to configure and connect the required hardware and software
  2. Review the Booting PetaLinux Project guide
  3. Download and unzip the Mango 802.11 ZCU104 PetaLinux reference project files
  4. Copy the contents of the sd_root folder to the root of a FAT32-formatted micro-SD card
  5. Insert the micro-SD card in the ZCU104 then power up
  6. Connect a micro-USB cable between the ZCU104 and a PC running a UART terminal emualtor
  7. Watch the two UART consoles to observe the boot process